NorthStar 958 Operator's Manual page 114

Chapter 7 - Understanding the Routes Function
Editing a route
using a waypoints
Page 106
To edit a route from a routes list:
1. Press the WAYPTS/ROUTES key, then press the ROUTES
menu key to display the ROUTES screen.
list
2. Press the CURSOR PAD to select the route you want to
change, then press the EDIT menu key. The name of the
route is displayed on the EDIT ROUTE screen.
3. If you want to change the route's name, do so now.
If the message at the bottom of the screen says PRESS
ENTER TO CONTINUE (USING CHARTS), press the USE
LIST menu key to switch to list-based editing.
958 Operator's Manual, Rev. A