NorthStar 958 Operator's Manual page 165

Sound Type
Beep All alarms
Beep Anchor alarm
Honk All alarms
Honk Anchor alarm
958 Operator's Manual, Rev. A
Table 7 below describes how to set the anchor alarm and all
other alarms to the desired audio.
Table 7: Beep and honk settings for all alarms
Setting(s)
ALARM AUDIO
Set
ALARM AUDIO
Set
ANCHOR ALARM
Set
ON
ALARM AUDIO
Set
HONK OUTPUT
Set
ALARMS
ANCHOR ALARM
Set
ON
HONK OUTPUT
Set
ANCHOR ALM
Chapter 11 - Alarms, TideTrack, and Video Display
Description
to ON
The 958's standard alarm beep.
to ON
The 958's standard alarm beep.
to
to ON
Alarm icons flash; the 958 simulta-
neously emits an output sound for half a
to ALL
second, followed by silence for half a
second until the alarm is manually
cleared.
to The alarm icon flashes, and the alarm
beeps (if the alarm audio is on), then
after 10 seconds the honk sequence
to starts.
Page 157