NorthStar 958 Operator's Manual page 169

Adjusting the
video's
transparency
958 Operator's Manual, Rev. A
•
On a full ECHO SOUNDER screen, you must first press
MORE, then press VIDEO.
To turn the image off, press VIDEO again.
If the video source isn't connected or isn't working properly, color bars will
be shown instead of a video image
To adjust the video's transparency, press the IN and OUT keys.
Pressing OUT lets you "see through" more of the video to the
screen underneath; pressing IN will make the video more
opaque. (If you're displaying the CHART screen or 3D STEER
screen or radar, the IN and OUT keys are reserved for zooming.
You must display a different screen, press IN or OUT, then
return to those screens.)
Chapter 11 - Alarms, TideTrack, and Video Display
NOTE:
Page 161