Using The Video Display Option - NorthStar 958 Operator's Manual

Chapter 11 - Alarms, TideTrack, and Video Display
Choosing a specific

Using the video display option

Turning the video
image on and off
Page 160
2. Press the CHOOSE TIDE STATION FROM CHART menu
key.
3. Press the CURSOR PAD to select the location for which
you want tide information, then press the ENTER key to
display a list of the nine tide stations closest to this cursor
location.
4. Press the CURSOR PAD to select the desired station, then
press the ENTER key twice to display the tides for that
station on the TIDE TRACK screen.
The TIDE TRACK screen displays tide information for today's
date. To display these tides for a different date:
date
1. Press the CONFIGURE menu key, then press the NEW
DATE menu key. The first digit of the current date flashes.
2. Press the CURSOR PAD to move to the month or digit
you want to change. To change a digit, press that key on
the KEYPAD. To change the month, press the CURSOR
PAD up and down.
3. When the date is correct, press ENTER twice to display
the tides for the new date.
If the 958 is connected to a video camera or other video
source, you can display the image right on the 958's display
screens.
Video isn't available on screens that require your input. Also,
when info or question boxes are displayed, the video image
will temporarily disappear until you acknowledge the
question.
The video image can be turned on in either of two ways:
On some screens, you access video by press the SPLIT
•
key, then the VIDEO key.
On other screens, such as the STEERING screen, you
•
access video with a single keypress (VIDEO key).
958 Operator's Manual, Rev. A