Using The Video Display Option - NorthStar 957 Operator's Manual

Choosing a tide
station from the
chart
Choosing a specific

Using the video display option

957 Operator's Manual, Rev. B
3. Press the CURSOR PAD to select the desired station, then
press the ENTER key twice to display the tides for that
station on the TIDE TRACK screen.
You can choose a tide station by moving the cursor to any
location along the U.S. coastline.
1. On the TIDE TRACK screen, press the CONFIGURE menu
key.
2. Press the CHOOSE TIDE STATION FROM CHART menu
key.
3. Press the CURSOR PAD to select the location for which
you want tide information, then press the ENTER key to
display a list of the nine tide stations closest to this cursor
location.
4. Press the CURSOR PAD to select the desired station, then
press the ENTER key twice to display the tides for that
station on the TIDE TRACK screen.
The TIDE TRACK screen displays tide information for today's
date. To display these tides for a different date:
date
1. Press the CONFIGURE menu key, then press the NEW
DATE menu key. The first digit of the current date flashes.
2. Press the CURSOR PAD to move to the month or digit
you want to change. To change a digit, press that key on
the KEYPAD. To change the month, press the CURSOR
PAD up and down.
3. When the date is correct, press ENTER twice to display
the tides for the new date.
If the 957 is connected to a video camera or other video
source, you can display the image right on the 957's display
screens.
Video isn't available on screens that require your input. Also,
when info or question boxes are displayed, the video image
Chapter 10 - Using Special Functions
Page 133