Canon FINISHER - D1 Service Manual page 94

CHAPTER 3 MECHANICAL SYSTEM
a. If the top of the copier's left cover is higher,
within 3 mm
Otherwise, perform the steps under D.2.
b. If the top of the upper cover of the machine
is higher,
within 2 mm
Otherwise, perform D.3.
2) Open the front cover. Remove the screw
[2], and detach the spanner [1] from behind
the front cover.
3-6
COPYRIGHT © 1999 CANON INC. CANON FINISHER - D1 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
Figure 3-112
Figure 3-113
[2]
[1]
Figure 3-114