Canon FINISHER - D1 Service Manual page 125

B. Positioning the Stapler
Paper Stopper
1) Release the machine from the copier.
2) Move the stapler unit [1] to the center of
the rail.
3) Loosen the screw [3] on the stapler paper
stopper (let, right) [2].
4) Holding the swing guide, insert a stack of
several sheets [4], and butt it against the
rear end stopper [5].
5) While butting the stack of sheets [4]
against the stapler paper stopper (left, right)
[2], tighten the screw [3].
COPYRIGHT © 1999 CANON INC. CANON FINISHER - D1 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 3 MECHANICAL SYSTEM
[3]
[2]
[1]
Figure 3-706
[5]
Figure 3-707
[2]
Figure 3-708
[3]
[2]
[4]
[3] [4]
3-37