Table of Contents
Advertisement
I.
FEATURES ................................ 1-1
II.
SPECIFICATIONS ...................... 1-2
A. Specifications ........................ 1-2
B. Cross Section ........................ 1-4
III. OPERATING THE FINISHER .... 1-5
Finisher .................................. 1-5
Staple Sort Mode ................... 1-7
I.
BASIC OPERATIONS ................ 2-1
A. Specifications ........................ 2-1
Finisher Controller PCB......... 2-3
II.
FEEDING/DRIVE SYSTEM...... 2-14
A. Outline .................................. 2-14
B. Feeding/Delivery ................. 2-19
C. Job Offset ............................. 2-22
............................................ 2-29
CHAPTER 3 MECHANICAL SYSTEM
I.
EXTERNALS AND CONTROLS
.................................................... 3-1
II.
PROCESSING TRAY UNIT ..... 3-13
III. TRAY B UNIT ........................... 3-21
IV. KNURLED BELT RELEASING UNIT
.................................................. 3-28
COPYRIGHT © 1999 CANON INC.
CONTENTS
CHAPTER 2 OPERATIONS
CANON FINISHER - D1 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
C. Replacing the Staple Cartridge
............................................. 1-10
D. Removing Staple Jams in the
Stapler Unit .......................... 1-13
IV. MAINTENANCE BY THE USER
.................................................. 1-15
E. Buffer Path ........................... 2-34
.................................................. 2-39
AUXILIARY PLATE .................. 2-40
V. STAPLING ................................ 2-42
VI. TRAY MOVEMENT .................. 2-50
VII. FANS ........................................ 2-54
VIII. POWER SUPPLY ..................... 2-56
IX. DETECTING JAMS .................. 2-59
V. KNURLED BELT ...................... 3-30
VI. BUFFER ROLLER UNIT .......... 3-31
VII. STAPLER UNIT ........................ 3-35
VIII. PCBs ......................................... 3-42
Advertisement
Table of Contents
Troubleshooting
