Canon FINISHER - D1 Service Manual page 19

4) Pick the empty staple case on its left and
right, and slip it off.
5) Set the new staple case.
Reference:
Be sure to set no more than one staple
case. Further, be sure that the staple
case is one designed for the finisher.
6) Remove the seal used to keep the staples
together by pulling it straight off.
7) Push in the stapler unit until the green le-
ver returns to its previous position.
COPYRIGHT © 1999 CANON INC. CANON FINISHER - D1 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 1 GENERAL DESCRIPTION
Figure 1-322
Figure 1-323
Figure 1-324
Figure 1-325
1-11