Canon FINISHER - D1 Service Manual page 162

CHAPTER 5 TROUBLESHOOTING
LED Description
LED101 Indicates various states:
• error
• jam
• settings
LED102 Turns on at 5 V (J101-5).
LED103 Turns on at 24 VR (J101-1).
LED104 Turns on when the stack delivery
motor (M7) is rotating normally (in
response to clock pulses from the
stack delivery motor clock sensor
(PI12).
LED105 Turns on at 24 VU (J101-3).
Flashes when the slave RAM
LED106
(IC121) is in operation.
LED107 Turns on when the inlet motor (M1)
is rotating normally (in response to
clock pulses form the inlet motor).
LED108
Turns on at 36 V (J114-1).
Table 5-207
5-26
COPYRIGHT © 1999 CANON INC.
State
LED101 indication
Error
In response to an error, 'E5XXxx'
will be indicated.
• E5XX error code
• xx detail code
Jam In response to a jam, 'Jxx' will be
indicated in sequence.
• Jxx jam code
Settings For indication, see the items under
various adjustments.
Table 5-209
Function of the Shorting Connector
Connector
J126-6 Connection of the power line to the inlet
-8
motor (M1) and the buffer motor (M2).
Table 5-210
CANON FINISHER - D1 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
Switch
Use it to set various adjustment
SW103
modes.
SW104 Use it to start and store adjustment
inputs.
SW105 Use it to enter adjustment values in +
direction.
SW106
Use it to enter adjustment values in -
direction.
SW107 Use it to set various modes.
Description
Description
Table 5-208