Canon FINISHER - D1 Service Manual page 91

C. Releasing from the
Copier
1) Remove the buffer roller knob, and detach
the inside cover.
2) Remove the upper cover.
3) Remove the two screws [2], and detach the
latch fixing plate (front) [1].
4) Shift up the latch claw (front) [3].
5) Remove the two screws [5], and detach the
latch fixing plate (rear) [4].
COPYRIGHT © 1999 CANON INC. CANON FINISHER - D1 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 3 MECHANICAL SYSTEM
[1]
Figure 3-106
Figure 3-107
[4]
Figure 3-108
[2]
[3]
[5]
3-3