Canon FINISHER - D1 Service Manual page 90

CHAPTER 3 MECHANICAL SYSTEM
[1] PCB cover (1)
B. Removing the Upper
Cover Unit
1) Remove two screws, and remove the up-
per rear cover.
2) Remove the two screws [1] from the side
plate.
3) Remove the screw [2], and detach the up-
per cover unit [3].
3-2
COPYRIGHT © 1999 CANON INC.
[1]
CANON FINISHER - D1 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
Figure 3-103
[1]
Figure 3-104
Figure 3-105
[1]
[3]
[2]