Canon FINISHER - D1 Service Manual page 117

B. Adjusting the Position of
the Knurled Belt
Releasing Solenoid (SL3)
1) Loosen the screws [1].
2) Slide the solenoid [2] so that the distance A
of the solenoid is 2.5 ± 0.2 mm; then,
tighten the screws.
COPYRIGHT © 1999 CANON INC.
Figure 3-404
CANON FINISHER - D1 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 3 MECHANICAL SYSTEM
A
[1]
[2]
3-29