Canon FINISHER - D1 Service Manual page 105

D. Removing the Processing
Tray
1) Remove the processing tray unit. (See
II.A.)
2) Remove the screw [1] from under the stack
delivery roller.
3) Remove the screw [2] from the processing
tray.
4) Slide the processing tray [3] in the direc-
tion of arrow A, and detach it into the di-
rection of arrow B.
COPYRIGHT © 1999 CANON INC. CANON FINISHER - D1 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 3 MECHANICAL SYSTEM
[1]
Figure 3-206
Figure 3-207
B A
Figure 3-208
[2]
[3]
3-17