Buffer Roller Unit - Canon FINISHER - D1 Service Manual

VI . BUFFER ROLLER
UNIT
A. Removing the Buffer
Roller Unit
1) Open the front cover and the upper cover.
2) Remove the buffer roller knob and the in-
side cover.
3) Disconnect the connector [1], and remove
the screw [2]; then, detach the upper cover
sensor mount.
4) Disconnect the connector [4], and remove
the two screws; then, detach the buffer
path switching solenoid (SL1) [3].
COPYRIGHT © 1999 CANON INC. CANON FINISHER - D1 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 3 MECHANICAL SYSTEM
[1]
Figure 3-601
Figure 3-602
[2]
[3]
[4]
3-31