Canon FINISHER - D1 Service Manual page 106

CHAPTER 3 MECHANICAL SYSTEM
E. Removing the Jogging
Motor
Reference:
The figures show the removal of the front
jogging motor. The rear jogging motor
may be removed in the same way.
1) Remove the processing tray unit (II.A); at
the same time, remove the processing tray
(II.D).
2) Turn the tray auxiliary plate motor [1] by
hand, and move the tray auxiliary plate
from the home position.
3) Remove the screw [3], and detach the mo-
tor cover [2].
3-18
COPYRIGHT © 1999 CANON INC. CANON FINISHER - D1 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[1]
Figure 3-209
[3]
[2]
Figure 3-210