Canon FINISHER - D1 Service Manual page 42

CHAPTER 2 OPERATIONS
b. Job Offset
Before being delivered to tray B, a sheet is first drawn into the processing tray once. The sheet is
then moved to the front or rear by the jogging plate. The stack of sheets on the processing tray is
delivered when it has collected a specific number of sheets.
Drawing in a Sheet
Delivering a Stack
2-16
COPYRIGHT © 1999 CANON INC.
Figure 2-203
Figure 2-204
Results of delivery when handling 4 sets in job offset mode
3rd set
1st set
Direction of delivery
Figure 2-205
CANON FINISHER - D1 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
4th set
2nd set