Canon FINISHER - D1 Service Manual page 89

I . EXTERNALS AND
CONTROLS
A. External Covers
Remove the covers as necessary when
cleaning, inspecting, or repairing the inside of
the machine.
Those covers that may be detached by
merely removing the mounting screws are
omitted from the discussions.
[1] Rear cover (6)
[2] Upper rear cover (2)
[3] Tray A (0)
[4] Stacking wall (upper; 4)
[5] Stacking wall (lower; 4)
[6] Foot cover (front; 2)
[7] Foot cover (rear; 2)
[8] Upper cover unit
[9] Tray B (4)
[1] Support cover (1)
[2] Inside cover (4)
[3] Inside lower cover (2)
[4] Buffer roller knob (0)
[5] Stopper (1)
COPYRIGHT © 1999 CANON INC. CANON FINISHER - D1 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 3 MECHANICAL SYSTEM
[1]
[3]
[9]
[5]
[7]
Figure 3-101
[5]
Figure 3-102
[2]
[4]
[6]
[1]
[2]
[4]
[3]
[8]
3-1