Canon FINISHER - D1 Service Manual page 114

CHAPTER 3 MECHANICAL SYSTEM
D. Mounting the Tray B Lift
Motor (M12)
1) Mount the motor so that the circle drawn
connecting the bosses [1] on the motor will
fit the large, round hole [2] on the mount-
ing face.
Reference:
You can check to see if the bosses are fit-
ted in the large, round hole in reference to
the small holes [3] on the side of the drive
belt.
3-26
COPYRIGHT © 1999 CANON INC.
[1]
CANON FINISHER - D1 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
Figure 3-309
[2]
Figure 3-310
[3]
[3]
Figure 3-311
[1]