Knurled Belt - Canon FINISHER - D1 Service Manual

CHAPTER 3 MECHANICAL SYSTEM
V . KNURLED BELT
A. Removing the Knurled
Belt
1) Remove the processing tray unit. (See
II.A.)
2) Release the machine from the copier. (See
I.C.)
3) Remove the rear cover.
4) Remove the two screws, and detach the
sort delivery guide [1].
5) Remove the E-ring [2] and the bearing [3]
from the front of the sort delivery roller.
6) Detach the knurled belt [4] from the sort
delivery roller shaft.
Caution:
When mounting the sort delivery guide
[1], take care not to trap the paper feeding
guide [2].
3-30
COPYRIGHT © 1999 CANON INC. CANON FINISHER - D1 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[1]
Figure 3-501
[3]
[4]
Figure 3-502
[1]
Figure 3-503
[2]
[2]