Canon FINISHER - D1 Service Manual page 128

CHAPTER 3 MECHANICAL SYSTEM
6) Perform manual stapling. (See Chapter 5.)
7) Check the stapling position against the
standard.
8) Move the stapler holder [4] in reference to
the index and according to the result of
comparison. (Use the two screws [5].)
9) While lifting the swing guide, insert a stack
of sheets [6], and butt it against the rear end
stopper [7].
3-40
COPYRIGHT © 1999 CANON INC.
Index
[5]
[5]
CANON FINISHER - D1 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
Direction of delivery
Figure 3-714
[4]
Figure 3-715
[7]
Figure 3-716
[6]