Canon FINISHER - D1 Service Manual page 112

CHAPTER 3 MECHANICAL SYSTEM
C. Removing the Tray B Lift
Motor (M12)
1) Remove tray B (four screws).
2) Move down the tray B unit as far as it goes
(III.B). Otherwise, the tray can drop when
the motor is removed.
3) Remove the screw, and detach the motor
driver PCB cover [1].
4) Disconnect the connector (J602) [2], and
free the harness from the cord clamp [3].
3-24
COPYRIGHT © 1999 CANON INC. CANON FINISHER - D1 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[1]
Figure 3-306
[2]
[3]
Figure 3-307