Table of Contents
Advertisement
Pages
p. 43, 44, 56, 57
p. 137 through 141
p. 215, 219
p. 264, 321
p. 271, 330
p. 287, 310, 348, 371
p. 421
p. 439
p. 495
p. 521
p. 528, 529
www.DataSheet4U.com
p. 527, 529
Main Revisions in This Edition
The following subseries were added in sections 1.6 and 2.6, "78K/0 Series Expansion."
µ PD78075B, 78075BY, 780018, 780018Y, 780058, 780058Y, 780034, 780034Y, 780024, 780024Y,
78014H, 780964, 780924, 780228, 78044H, 78044F, 78098B, 780973 Subseries
The illustrations were modified in Figures 6-6 and 6-8, "P20, P21, P23 to P26 Block Diagrams", Figures
6-7 and 6-9, "P22 and P27 Block Diagrams", and Figure 6-10, "P30 to P37 Block Diagrams".
Figures 9-10 and 9-13, "Square Wave Output Operation Timings" were added.
Cautions were added in sections 15.1 and 16.1, "Serial Interface Channel 0 Configuration".
Cautions were added in sections 15.3 and 16.3, "Serial Interface Channel 0 Control Register (2) Serial
operating mode register 0 (CSIM0)".
Cautions were added in sections 15.4.3 and 16.4.3, "(2) (a) Bus release signal (REL), (b) Command
signal (CMD), (11) Cautions on SBI mode".
(3) MSB/LSB switching as the start bit was added in section 17.4.2, "3-wire serial I/O mode operation".
(3) (d) Busy control option, (e) Busy & strobe control option, and (f) Bit slippage detection function in
section 17.4.3 of the former edition were changed to (4) Synchronization control and the description
was improved.
Caution was added in Table 22-1, "Differences between µ PD78P014, 78P014Y, and Mask ROM
Version".
APPENDIX A DIFFERENCES BETWEEN µ PD78014, 78014H, AND 78018F SUBSERIES was added.
Windows compatible 5-inch FD products was erased in APPENDIX B DEVELOPMENT TOOLS.
The following products were changed from "Under development" to "Developed".
IE-78000-R-A
ID78K0
The mark
shows major revised points.
Description
7
Advertisement
Table of Contents
