Optional) Installing Motorized Dampers And Cables; Optional) Installing Electric Heater Components And Cables - Huawei FusionCol8000-E240 User Manual

FusionCol8000-E240 Modular Indirect Evaporative
Cooling System
User Manual
3.7 (Optional) Installing Motorized Dampers and
Cables
Procedure
Step 1 Install the motorized damper at the air vent of the unit.
Step 2 Install the cables. Connect one end of a cable to the X504 port, route the cable
along the outside of the unit, and reserve the other end near the air damper
actuator.
Step 3 Connect the air damper cable terminal and air damper actuator terminal.
Figure 3-34 Terminal connection
----End
3.8 (Optional) Installing Electric Heater Components
and Cables
Electric heater components include the electric heating belt, temperature sensor
probe, transformer, and electric heater controller.
Issue 02 (2021-04-15)
NO TE
● Ensure that cable routing does not affect the maintenance of the unit.
● Cables must be protected against damage.
Copyright © Huawei Technologies Co., Ltd.
3 System Installation (Building Scenario)
61