FusionCol8000-E240 Modular Indirect Evaporative
Cooling System
User Manual
Table 4-5 Cable terminal requirements
Port
Active input
Standby
input
4.3 Installing a FusionCol8000-E
4.3.1 Unpacking and Checking
Procedure
Step 1 Verify that the package is intact. If any damage is found, notify the carrier
immediately.
Step 2 Remove the plastic packaging materials.
Step 3 Check the types and quantity of fittings according to the fitting list. If any fitting is
missing, contact Huawei technical support.
----End
Issue 02 (2021-04-15)
Connection
Method
Crimped DT
terminals
Crimped DT
terminals
Copyright © Huawei Technologies Co., Ltd.
4 System Installation (FDC Scenario)
Bolt
Torque
Specificatio
ns
M10
20 N·m
M10
20 N·m
Remarks
Standard
configuratio
n, delivered
with the
product.
Standard
configuratio
n, delivered
with the
product.
71