Huawei FusionCol8000-E240 User Manual page 269

FusionCol8000-E240 Modular Indirect Evaporative
Cooling System
User Manual
Menu
Settings > Comm
Settings > WIFI
Settings
Settings > Comm
Settings > Modbus
Settings
Issue 02 (2021-04-15)
Parameter
WiFi SSID
WiFi
password
Enable WiFi
WiFi group
sharing
enable
Baud rate
Communicat
ion address
RS485
monitoring
grouping
Copyright © Huawei Technologies Co., Ltd.
C Parameter Description
Description
Set WiFi SSID based on the actual
configuration. WiFi SSID is the name
used for the WiFi hotspot over which a
mobile phone connects to smart cooling
product.
Enter the WiFi password when you use a
mobile phone to connect to the WiFi. The
WiFi has no default password. When you
enable the WiFi function for the first
time, you need to set a password.
Enables the WiFi function of the smart
cooling product.
When Enable WiFi is set to Enable, the
mobile phone can access the smart
cooling product in the same FE cascading
network when connecting to the WiFi of
the smart cooling product.
Set the baud rate as required. The value
should be consistent with that set on the
NMS.
Enter the communications address of the
smart cooling product as planned. The
NMS communicates with the smart
cooling product using this address, and
the communications addresses of two
smart cooling products connected to the
same NMS must be different.
● For scenarios without grouping, set
this parameter to Enable for the last
device.
● For scenarios with grouping, set this
parameter to Enable for the last
device in each teamwork control
group.
260