Huawei FusionCol8000-E240 User Manual page 277

FusionCol8000-E240 Modular Indirect Evaporative
Cooling System
User Manual
Menu
Settings > System
Settings >
Compressor
Settings > System
Settings > Indoor
Fan
Settings > System
Settings > Spray
System
Settings > System
Settings > Exhaust
Fan
Settings > System
Settings >
Mainboard
Maint >
Performance Maint
Issue 02 (2021-04-15)
Parameter
Compressor*
preheating
Indoor fan
control type
Air-side
difference
pressure
sensor type
Min indoor
fan speed
Max indoor
fan speed
Supply air
damper
Return air
damper
Spray pump
rotation
period
Antifreeze
temperature
Min exhaust
fan speed
Max exhaust
fan speed
Exhaust air
damper
Differ
pressure
switch for
outd intake
air filter
Preset total
system
power
consumption
System total
power
consumption
Copyright © Huawei Technologies Co., Ltd.
C Parameter Description
Description
Specifies whether to forcibly start the
preheating function of the compressor oil
heating belt.
Set this parameter to R/S air temp diff
rate ctrl, R/S air temp diff ctrl, or
Pressure diff ctrl.
Select the measuring range of the air-
side differential pressure sensor.
Specifies the minimum rotational speed
of the indoor fan.
Specifies the maximum rotational speed
of the indoor fan.
Supply air damper can be set to Enable
or Disable.
Return air damper can be set to Enable
or Disable.
Specifies spray pump rotation period.
Specifies the lowest temperature for the
spray system.
Specifies the minimum rotational speed
of the exhaust fan.
Specifies the maximum rotational speed
of the exhaust fan.
Exhaust air damper can be set to
Enable or Disable.
You can enable or disable the differential
pressure switch of the outdoor intake air
filter.
Specifies the total energy consumption of
the unit.
Display the accumulated runtime for
each component.
268