Initial Configuration; Setting Temperature And Humidity Values And (Optional) Enabling T/H Sensors - Huawei FusionCol8000-E240 User Manual

FusionCol8000-E240 Modular Indirect Evaporative
Cooling System
User Manual
No.
9
10
11
12

6.4 Initial Configuration

Log in as the admin user (preset password: 000001) when setting initial
parameters.
6.4.1 Setting Temperature and Humidity Values and
(Optional) Enabling T/H Sensors
Prerequisites
●
●
Procedure
Step 1 On the home screen, choose Settings > System Settings > T/H Sensor.
Issue 02 (2021-04-15)
Item
Status bar
Alarm bar
Login/Logout button
Teamwork control
button
The T/H sensors outside the cabinet need to be enabled when they are
installed, otherwise, skip
This section describes how to enable Cold aisle sensor 1.
Copyright © Huawei Technologies Co., Ltd.
Note
You can tap the status bar to change the icon
status.
You can tap the alarm bar to enter the active
alarm screen to view all active alarms.
● indicates that you have not
logged in. You can tap this icon to log in.
●
logged in as an admin or operator user. You
can tap this icon to log out.
● indicates that teamwork control is
disabled.
● indicates that teamwork control is
enabled and no teamwork control alarm is
generated.
● indicates that teamwork control is
enabled and a teamwork control alarm is
generated.
Step 2.
6 Power-On Commissioning
indicates that you have
106