Installing An Air Deflector - Huawei FusionCol8000-E240 User Manual

FusionCol8000-E240 Modular Indirect Evaporative
Cooling System
User Manual
Figure 3-29 Filling the hole with sealing putty
(1) Paper protective film
----End

3.5 Installing an Air Deflector

Procedure
Step 1 Assemble an air deflector.
Figure 3-30 Assembling an air deflector
Issue 02 (2021-04-15)
NO TE
After the power cables are connected and confirmed, use sealing putty to fill the gap
between the cables and the cabinet (as shown in the two holes in the preceding figure).
You can obtain sealing putty from the fittings bag. The following figure shows how to fill a
gap using sealing putty.
Copyright © Huawei Technologies Co., Ltd.
3 System Installation (Building Scenario)
(2) Sealing putty (standard configuration)
57