Installing With Holding Rails - Huawei 2288H V5 User Manual

2288H V5 Server
User Guide
3.
Step 3 Connect power cables to the server and power on the server. Connect a network cable, a VGA
cable, or USB devices as required.
----End

4.4.3 Installing with Holding Rails

The holding rails are for a cabinet with a distance of 610 mm to 914 mm (24.02 in. to 35.98
in.) between the front and rear mounting bars.
The 2288H V5 servers are stackable onto holding rails.
Step 1 Install the holding rails.
1.
Issue 04 (2018-09-04)
Figure 4-7 Installing the server
When the two mounting ears of the server come into contact with the mounting bars on
the cabinet, tighten their captive screws to secure the server. See (2) in
Hold down the ejector release button on the front end of a holding rail and pull out the
hook. See (1) and (2) in
Copyright © Huawei Technologies Co., Ltd.
Figure 4-8.
4 Setup
Figure 4-7.
74