Huawei 2288H V5 User Manual page 84

2288H V5 Server
User Guide
2.
3.
4.
5.
Step 2 Install the server.
1.
Issue 04 (2018-09-04)
Figure 4-8 Installing the front and rear ends of a holding rail
Insert the positioning pins on the rear of the rail into the square holes in the cabinet. See
(3) in Figure 4-8.
Align the front with a square hole, and push the holding rail forward until it snaps into
place. See (4) in Figure
Push the hook backwards so that its metal sheet touches the mounting bar. See (5) in
Figure 4-8.
(Optional) Install an M6 screw in the third square hole at the rear of the holding rail to
secure it. See (6) in Figure
Pull out the inner rails as far as they will go. See
Copyright © Huawei Technologies Co., Ltd.
4-8.
4-8.
Figure 4-9.
4 Setup
75