Huawei 2288H V5 User Manual page 110

2288H V5 Server
User Guide
l
Issue 04 (2018-09-04)
Figure 4-33 Querying version information
c. Choose Information > Overview, and view the server health status, as shown in
Figure 4-34.
Figure 4-34 Querying server health status
d. Clear any alarms if present. For details, see the
Handling.
Check the 2288H V5 using the iBMC CLI.
a. Set an IP address for the PC. This IP address must be on the same network segment
as the iBMC management network port.
b. Connect a network cable from the PC to the iBMC management network port of the
2288H V5.
c. Start a Secure Shell (SSH) tool on the PC and log in with the IP address of the
iBMC management network port and iBMC user name and password.
NOTE
The SSH service is enabled by default. If the SSH service is disabled, enable it by choosing
Configuration > Services on the iBMC WebUI.
d. View the 2288H V5 version information.
Check that the 2288H V5 versions meet site requirements.
iBMC:/->ipmcget -d ver
------------------- iBMC INFO -------------------
IPMC CPU: Hi1710
IPMI Version: 2.0
CPLD Version: (U4269)1.02
Active iBMC Version: (U4282)2.50
Active iBMC Build: 013
Active iBMC Built: 20:49:16 Jun 1 2017
Backup iBMC Version: 2.50
SDK Version: 3.03
SDK Built: 14:23:58 May 27 2017
Active Uboot Version: 2.1.04 (May 27 2017 - 14:24:27)
Copyright © Huawei Technologies Co., Ltd.
Huawei Rack Server iBMC Alarm
4 Setup
101