Removing The Built-In Drive Assembly - Huawei 2288H V5 User Manual

2288H V5 Server
User Guide
Figure 3-17 Connecting a supercapacitor
Step 10 Install the full-height full-length riser card tray as required. For details, see
Riser Card
Step 11 Install the chassis cover. For details, see
Step 12 Install the server. For details, see
Step 13 Connect the power cables. For details, see
Step 14 Power on the server. For details, see
----End

3.10 Removing the Built-in Drive Assembly

Step 1 Wear an ESD wrist strap. For details, see
Step 2 Power off the server. For details, see
Step 3 Remove the power cables. For details, see
Step 4 Remove the server. For details, see
Step 5 Remove the chassis cover. For details, see
Step 6 Remove all drives from the drive module. For details, see
Drive.
Issue 04 (2018-09-04)
Tray.
4.4 Installing the Server on Guide
Copyright © Huawei Technologies Co., Ltd.
3.5 Installing the Chassis
5.4 PSU.
3.1 Powering On the
12 Preventing Electrostatic
3.2 Powering Off the
3.7 Removing Cables from a
3.3 Removing the Server and Guide
3.4 Removing the Chassis
5.3.1 Removing a SAS/SATA
3 Basic Operations
3.13 Installing a
Cover.
Rails.
Server.
Discharge.
Server.
PSU.
Rails.
Cover.
58