Installing The Built-In Drive Assembly - Huawei 2288H V5 User Manual

2288H V5 Server
User Guide
Step 7 Remove all cables from the built-in drive module. For details, see
Step 8 Lift the built-in drive assembly. See
Figure 3-18 Removing the built-in drive assembly
Step 9 Place the removed built-in drive assembly in an ESD bag.
----End

3.11 Installing the Built-in Drive Assembly

Step 1 Wear an ESD wrist strap. For details, see
Step 2 Power off the server. For details, see
Step 3 Remove the power cables. For details, see
Step 4 Remove the server. For details, see
Step 5 Remove the chassis cover. For details, see
Step 6 Push the plastic structure in the arrow direction on both sides of the chassis, and place the
built-in drive tray downwards. See
Issue 04 (2018-09-04)
Figure
3.2 Powering Off the
3.3 Removing the Server and Guide
Figure
Copyright © Huawei Technologies Co., Ltd.
3-18.
12 Preventing Electrostatic
Server.
3.7 Removing Cables from a
3.4 Removing the Chassis
3-19.
3 Basic Operations
7 Internal Cabling.
Discharge.
PSU.
Rails.
Cover.
59