Rear Drive Module - Huawei 2288H V5 User Manual

2288H V5 Server
User Guide
Figure 5-59 Installing the flexible NIC
Step 11 Tighten the two screws using the Phillips screwdriver to secure the NIC. See (2) in
5-59.
Step 12 Connect the network cables to the NIC.
Step 13 Install the drive module (see
Installing a Riser Card
Step 14 Install the chassis cover. For details, see
Step 15 Install the server. For details, see
Step 16 Connect the power cables. For details, see
Step 17 Power on the server. For details, see
Step 18 Log in to the iBMC WebUI, and check whether the new component is normal. For details, see
the
----End

5.16 Rear Drive Module

To install a rear drive module, perform the following steps:
Step 1 Wear an ESD wrist strap. For details, see
Issue 04 (2018-09-04)
Tray) above the NIC.
Huawei Rack Server iBMC User
Copyright © Huawei Technologies Co., Ltd.
5.16 Rear Drive Module) or riser card module (see
3.5 Installing the Chassis
4.4 Installing the Server on Guide
5.4 PSU.
3.1 Powering On the
Guide.
12 Preventing Electrostatic
5 Optional Part Installation
3.13
Cover.
Rails.
Server.
Discharge.
Figure
169