Right Mounting Ear - Huawei 2288H V5 User Manual

2288H V5 Server
User Guide
Step 13 Install the chassis cover. For details, see
Step 14 Install the server. For details, see
Step 15 Connect the power cables. For details, see
Step 16 Power on the server. For details, see
----End

5.18 Right Mounting Ear

To install the right mounting ear, perform the following steps:
Step 1 Wear an ESD wrist strap. For details, see
Step 2 Power off the server. For details, see
Step 3 Remove the power cables. For details, see
Step 4 Remove the server. For details, see
Step 5 Remove the chassis cover. For details, see
Step 6 Remove the air duct or the built-in drive assembly. For details, see
Duct
Step 7 Take a spare right mounting ear out of its ESD bag.
Step 8 Route the mounting ear signal cable through the chassis in the arrow direction. See (1) in
Figure
Issue 04 (2018-09-04)
or 3.10 Removing the Built-in Drive
5-62.
Copyright © Huawei Technologies Co., Ltd.
3.5 Installing the Chassis
4.4 Installing the Server on Guide
5.4 PSU.
3.1 Powering On the
12 Preventing Electrostatic
3.2 Powering Off the
3.7 Removing Cables from a
3.3 Removing the Server and Guide
3.4 Removing the Chassis
Assembly.
5 Optional Part Installation
Cover.
Rails.
Server.
Discharge.
Server.
PSU.
Rails.
Cover.
3.8 Removing the Air
172