Installing A Dimm - Huawei 2288H V5 User Manual

2288H V5 Server
User Guide

5.13.7 Installing a DIMM

Step 1 Wear an ESD wrist strap. For details, see
Step 2 Power off the server. For details, see
Step 3 Remove the power cables. For details, see
Step 4 Remove the server. For details, see
Step 5 Remove the chassis cover. For details, see
Step 6 Remove the air duct or the built-in drive assembly. For details, see
Duct
Step 7 Take a spare DIMM out of the DIMM box.
Step 8 Simultaneously press the ejectors outwards. See
Figure 5-53 Opening the ejectors
Step 9 Align the DIMM with the DIMM slot, and insert the DIMM into the slot. See
The two retaining clips pop up into place automatically.
Issue 04 (2018-09-04)
– Installation Rules for the Memory Patrol Mode
See the general DIMM installation rules.
or 3.10 Removing the Built-in Drive
NOTE
Do not touch the edge connector on a DIMM with bare hands. Before inserting a DIMM, ensure that the
edge connector is not polluted.
Copyright © Huawei Technologies Co., Ltd.
12 Preventing Electrostatic
3.2 Powering Off the
3.7 Removing Cables from a
3.3 Removing the Server and Guide
3.4 Removing the Chassis
Assembly.
Figure 5-53.
5 Optional Part Installation
Discharge.
Server.
PSU.
Rails.
Cover.
3.8 Removing the Air
Figure 5-54.
162