Huawei 2288H V5 User Manual page 130

2288H V5 Server
User Guide
Step 4 Select the NVMe SSD to be removed.
Step 5 Click eject.
The "Eject Succeed" message is displayed, as shown in
Figure 5-11 Success message
If a success message is displayed, you can hot remove the NVMe SSD. If a failure message
indicating the OS is accessing the NVMe SSD is displayed, stop related services before
clicking eject again. You can hot remove the NVMe SSD only when a success message is
displayed.
Step 6 Click OK.
Step 7 Observe the NVMe SSD indicators. When the green indicator is off and the yellow indicator
blinks at 0.5 Hz, slowly remove the NVMe SSD.
For details about how to manually remove an NVMe SSD, see
Drive.
----End
Linux
Step 1 If the server runs RHEL 7.3, upgrade the kernel to support orderly hot swap of NVMe SSDs.
Upgrade the kernel of RHEL 7.3 to kernel-3.10.0-514.26.2.e17.x86_64 or later.
1.
2.
Issue 04 (2018-09-04)
NOTE
The following operations apply only to RHEL 7.3 and RHEL 7.4. For other Linux OSs, contact
Technical Support.
Log in to the server whose OS kernel is to be upgraded as root.
Check the current kernel version.
uname -a
Copyright © Huawei Technologies Co., Ltd.
5 Optional Part Installation
Figure 5-11.
5.3.1 Removing a SAS/SATA
15.1
121