Huawei 2288H V5 User Manual page 143

2288H V5 Server
User Guide
The power cable connection methods are as follows:
l
l
l
l
Figure 5-26 Connecting power cables to a GPU
Step 12 Install the riser card tray. For details, see
Step 13 Install the chassis cover. For details, see
Step 14 Install the server. For details, see
Step 15 Connect the power cables. For details, see
Step 16 Power on the server. For details, see
Step 17 Log in to the iBMC WebUI, and check whether the new component is normal. For details, see
the
----End
Issue 04 (2018-09-04)
Using no power cable
Using a 6-pin power cable
Connect the 6-pin connector on the GPU to an 8-pin connector on either side of the riser
card. See (1) in Figure
Using an 8-pin power cable
Connect the 8-pin connector on the GPU to an 8-pin connector on either side of the riser
card. See (2) in Figure
Using an 8-pin (one-to-two) power cable
Connect the 8-pin connector on the GPU to the 8-pin connectors on both sides of the
riser card. See (3) in Figure
Huawei Rack Server iBMC User
Copyright © Huawei Technologies Co., Ltd.
5-26.
5-26.
5-26.
3.13 Installing a Riser Card
3.5 Installing the Chassis
4.4 Installing the Server on Guide
5.4 PSU.
3.1 Powering On the
Guide.
5 Optional Part Installation
Tray.
Cover.
Rails.
Server.
134