Huawei 2288H V5 User Manual page 159

2288H V5 Server
User Guide
Figure 5-42 Installing the other edge of a CPU
Step 13 Release the CPU carrier so that the other edge of the CPU clips into place.
Step 14 Check that the CPU is securely installed and level with the carrier. Press down to secure any
raised parts.
Step 15 Determine the area on the CPU that will be in contact with the heat sink, and use a clean blade
or card to evenly paste 0.4 ml of thermal compound on the area.
Figure 5-43
shaped, and cross pasting methods are recommended.
Figure 5-43 Pasting methods
The thermal compound layer is as thick as a piece of common paper.
smeared thermal compound layer. Ensure that the thermal compound is evenly and fully
painted.
Issue 04 (2018-09-04)
NOTE
The thermal compound injector has volume marks.
shows six methods for pasting thermal compound. Dual-line, five-point, S-
Copyright © Huawei Technologies Co., Ltd.
5 Optional Part Installation
Figure 5-44 shows the
150