Setting The Management Network Port Ip Address - Huawei 2288H V5 User Manual

2288H V5 Server
User Guide
Step
Configure RAID.
Configure the BIOS.
Install an OS.

4.6.3 Setting the Management Network Port IP Address

You can set the IP address using any of the following methods:
Using the iBMC WebUI
For details, see the
Using the iBMC CLI
For details, see the
Using the BIOS
Step 1 Log in to the Remote Virtual Console. For details, see
Virtual
Step 2 On the Remote Virtual Console, click
Step 3 Choose Reset.
The system displays "Are you sure to perform this operation?"
Step 4 Click Yes.
The server restarts.
Step 5 When information shown on the following screen is displayed, press Delete or F4 to access
the BIOS setup utility.
Issue 04 (2018-09-04)
Action
Configure RAID for the server. For details, see the
Server RAID Controller Card User
Configure the server BIOS, including setting the boot option
priority and BIOS password.
Install an OS for the server.
Huawei Rack Server iBMC User
Huawei Rack Server iBMC User
Console.
NOTE
l To go to the Front Page, press F11 or F3.
l To go to PXE, press F12.
l To go to the Smart Provisioning GUI, press F6.
Copyright © Huawei Technologies Co., Ltd.
Guide.
Guide.
Guide.
14.2 Logging In to the Remote
or on the menu bar.
4 Setup
Huawei V5
95