Huawei 2288H V5 User Manual page 103

2288H V5 Server
User Guide
Figure 4-26 Initial configuration process
Table 4-5
Table 4-5 Configuration process
Step
Set the management
network port IP
address.
Log in to the iBMC
WebUI.
Check the server.
Change the initial
passwords.
Issue 04 (2018-09-04)
describes the initial configuration process.
Action
Set an IP address for the management network port.
Log in to the iBMC WebUI from a local PC.
l Check that the server version information is correct.
l Check that no alarm is generated for the server.
l Change the iBMC user name and password for the server.
l Change the U-Boot password.
Copyright © Huawei Technologies Co., Ltd.
4 Setup
94