Supercapacitor - Huawei 2288H V5 User Manual

2288H V5 Server
User Guide
Figure 5-35 Installing an M.2 SSD module
Step 4 Log in to the iBMC WebUI, and check whether the new component is normal. For details, see
the
----End

5.11 Supercapacitor

To install a supercapacitor, perform the following steps:
Step 1 Wear an ESD wrist strap. For details, see
Step 2 Power off the server. For details, see
Step 3 Remove the power cables. For details, see
Step 4 Remove the server. For details, see
Step 5 Remove the chassis cover. For details, see
Step 6 Take a spare supercapacitor out of its ESD bag.
Step 7 Place the supercapacitor downwards and exert even force to install it in the tray. Ensure that
the supercapacitor is secured by the latches. See
Issue 04 (2018-09-04)
Huawei Rack Server iBMC User
NOTE
Before installing a supercapacitor, power off the server for electrical safety.
Copyright © Huawei Technologies Co., Ltd.
Guide.
12 Preventing Electrostatic
3.2 Powering Off the
3.7 Removing Cables from a
3.3 Removing the Server and Guide
3.4 Removing the Chassis
Figure 5-36.
5 Optional Part Installation
Discharge.
Server.
PSU.
Rails.
Cover.
143