Huawei ECC800-Pro User Manual page 62

ECC800 Data Center Controller
User Manual (for ECC800-Pro)
Specifications
Table 3-43 Skylight actuator technical specifications
Item
Power input
PoE port
Wireless
communicatio
n
AI/DI port
DO output
DI input
BLINK button
Address DIP
switch
E-label
Indicators
Table 3-44 Skylight actuator indicators
Indicator
Power
RUN
Issue 02 (2020-09-07)
Specifications
● DC input: terminal, with an input voltage of 36 V DC–60 V
DC
● PoE power supply: one PoE port that complies with
IEEE802.3at
FE communication with the rate of 10/100 Mbit/s
One wireless port that complies with IEEE 802.15.4, mutual
backup with FE communication
Two AI/DI ports for detecting fire extinguishing linkage signals;
smoke detection signals also supported
One 12 V DC power output for controlling the skylight
magnetic lock; driving nine skylight magnetic locks
simultaneously
One DI input port for connecting to the window open button
● Press the button for less than 1 second to start blinking.
● Hold down the button for 1–5 seconds to search for a
network and start networking.
● Hold down the button for more than 10 seconds to clear
network parameters.
4-pin address DIP switch
Supported
Color Name
Green Power input
status
indicator
Green Running
status
indicator
Copyright © Huawei Technologies Co., Ltd.
Status Description
Steady on The power input is normal.
Off There is no power input.
Off The power is abnormal or
the board program is
loading.
3 Device Description
51