Huawei ECC800-Pro User Manual page 59

ECC800 Data Center Controller
User Manual (for ECC800-Pro)
Figure 3-21 AC actuator
(1) AC OUT2 port
(5) BLINK button
Specifications
Table 3-41 AC actuator technical specifications
Item
Power input
Power output
Wireless
communication
RS485 serial
port
AI/DI detection
PAD intelligent
charging
Issue 02 (2020-09-07)
(2) AC OUT1 port
(6) AIDI_1 and AIDI_2
Specifications
One AC input, 100 V AC to 240 V AC.
● AC OUT1: two AC outputs, 100 V AC to 240 V AC,
maximum total current: 5 A.
● AC OUT2: one AC output, 100 V AC to 240 V AC, maximum
current: 5 A.
One wireless communication port that complies with
IEEE802.15.4
One route of dual RS485 ports, not isolated (reserved)
Two AI/DI dry contacts, connecting to two light buttons
Charging stops when the PAD battery level reaches 100%.
When the battery level is lower than 40% (default value,
which can be set to 30, 40, or 50), charging starts.
Copyright © Huawei Technologies Co., Ltd.
(3) AC IN port
(7) COM1 and COM2
3 Device Description
(4) Status indicator
48