Huawei ECC800-Pro User Manual page 340

ECC800 Data Center Controller
User Manual (for ECC800-Pro)
Procedure
Step 1 Log in to the ECC800-Pro WebUI as an administrator, and check whether the
device exists on the Monitoring page.
The following is an example of confirming the access of a WiFi converter.
●
●
----End
Follow-up Procedure
Choose Home > Plan View on the ECC800-Pro WebUI, and drag the device to the
corresponding position in the Smart Module View pane based on the actual
device layout.
Issue 02 (2020-09-07)
If the device exists, and communication status is normal, the device has
accessed the ECC800-Pro successfully.
Figure 8-32 Device accessed the ECC800-Pro
If the device does not exist, check that the cable is properly connected
between the device and the ECC800-Pro and that the device and ECC800-Pro
are operating properly.
Copyright © Huawei Technologies Co., Ltd.
8 FAQ
329