Huawei ECC800-Pro User Manual page 195

ECC800 Data Center Controller
User Manual (for ECC800-Pro)
Step 2 Enable camera NTP synchronization.
The camera NTP synchronization function for the server is disabled by default. The
camera NTP synchronization function needs to be enabled for the server that
connects to the camera. After the camera NTP synchronization function is enabled,
cameras will automatically time-synchronize from their access servers.
1.
2.
3.
4.
5.
----End
Follow-up Procedure
●
●
●
●
Issue 02 (2020-09-07)
Figure 6-53 Setting the external IP address of the OMU
Log in to the OMU portal of the VCN as user admin.
Choose Maintenance > Unified Configuration.
Select the server that the camera needs to access, set Module name to SCU
and Parameter type to System property, and click Search.
Figure 6-54 Configuring camera NTP synchronization
In the search results, click Edit in the row where Parameter Name is NTPIPC
and set Value to 1.
Click Save. After the camera NTP synchronization function is enabled, the
camera, after being connected to the server, will automatically time-
synchronize with the server.
The VCN automatically restarts after the IP address is modified. The restart
takes about 5 minutes. After the restart, use the new IP address to access the
VCN.
Change the PC IP address to an address in the network segment of the new
VCN IP address, enter the VCN IP address in the address box of the Internet
browser, and log in to the OMU Portal system.
(Optional) Set up a VCN stack. For details, log in to the https://
e.huawei.com/, search for the VCN product documentation, open the
documentation, and see the section (Optional) Deploying IVS in Stack
Mode.
(Optional) Create a VCN cluster. For details, log in to the https://
e.huawei.com/, search for the VCN product documentation, open the
Copyright © Huawei Technologies Co., Ltd.
6 Feature Description
184