ECC800 Data Center Controller
User Manual (for ECC800-Pro)
Name
Button holding
down
Default Button
Table 3-84 Default button description
Name
Default button
3.2.21.2 iBAT
The iBAT is a battery monitoring module that monitors the voltages, internal
resistances, and pole temperatures of batteries and supports 12 V power.
Features
●
●
●
iBAT Appearance
Figure 3-53 iBAT2.0
Issue 02 (2020-09-07)
Definition
Press and hold the
button for more
than 10s but less
than 20s.
Definition
Hold down the
button for more
than 10s.
Monitors the voltages, internal resistances, and pole temperatures of 12 V
batteries.
Supports the hibernation function. (When it detects that the battery voltage is
low, it will enter the low-power mode.)
Communicates with the iBOX wirelessly.
Copyright © Huawei Technologies Co., Ltd.
3 Device Description
Function
Clears the current network
(including the network parameters
of all the online iBATs).
Function
Reset to the default IP address
(192.168.0.10)
88