Lock, Unlock, Reset (Lock, Unlock, Reset) - Siemens Sinumerik 840D sl Programming Manual

Motion synchronous actions
10.5 Technology cycles
Jump instructions and jump destinations
GOTO
GOTOF
GOTOB
Label:
Block number
N100
:100
10.5.9

Lock, unlock, reset (LOCK, UNLOCK, RESET)

Function
The sequence of a technology cycle can be locked, unlocked or reset using another modal
synchronized action.
Syntax
LOCK(<n1>,<n2>,...)
UNLOCK(<n1>,<n2>,...)
RESET(<n1>,<n2>,...)
Significance
LOCK
UNLOCK
RESET
<n1>,<n2>,...
644
Command to lock synchronized actions
The active action is interrupted.
Command to unlock synchronized actions
Command to reset technology cycles
Identification numbers of synchronized actions or technology cycles
that are to be locked, unlocked or reset.
Firstly jump forwards and then backwards
Jump forwards
Jump backwards
Jump marker
Jump destination for this block
Block number is subblock
Block number is main block
Programming Manual, 02/2011, 6FC5398-2BP40-1BA0
Job planning