Siemens Sinumerik 840D sl Programming Manual page 803

Param Param
No.
Mask intern
26
_AMODE
Job planning
Programming Manual, 02/2011, 6FC5398-2BP40-1BA0
Explanation
Alternative mode
UNITS: Dimensioning for top of groove (for interface only)
0 = At reference point
1 = Opposite the reference point
TENS: Depth
0 = Absolute
1 = Incremental
HUNDREDS: Dimensioning for width (for interface only)
0 = At outer diameter (top)
1 = At inner diameter (bottom)
THOUSANDS: Radius/chamfer 1 (_RCO1)
0 = Radius
1 = Chamfer
TEN THOUSANDS: Radius/chamfer 2 (_RCI1)
0 = Radius
1 = Chamfer
HUNDRED THOUSANDS: Radius/chamfer 3 (_RCI2)
0 = Radius
1 = Chamfer
MILLIONS POSITION: Radius/chamfer 4 (_RCO2)
0 = Radius
1 = Chamfer
Programming cycles externally
16.1 Technology cycles
803